透过 VNC Viewer 远端桌面连线
本文将展示在个人电脑端使用 VNC Viewer 登入 L86duntu 桌面的方法。
准备
在登入 L86duntu 前,我们需先建立好个人电脑与 L86duntu 之间的网路连线,可透过下列任一种方法来进行连线。
1. 透过 USB Device 介面连线
用一条 USB 转接线连接 86Duino 和电脑,如下图:
2. 透过有线或无线网路连线
例如,让 86Duino 透过网路线连接上个人电脑的区域网路,如下图:
接下来就可以准备登入 L86duntu 了,下面我们以 Windows 作业系统为例,说明登入方式。
步骤 1
下载并安装 Apple’s Bonjour Printer Service helper app。
步骤 2
先前往 http://en.softonic.com/s/vnc-viewer 网页,下载和安装 VNC Viewer 程式。
安装完成后,启动 VNC Viewer 程式:
步骤 3
在 vncviewer 主画面上,输入 L86duntu 的主机名称 (86duino.local) 和 VNC 使用者编号 (预设为 1),如下:
86duino.local:1
然后按下 Connect 按钮。
步骤 4
过程中会跳出如下视窗,请按 Continue 按钮继续:
步骤 5
接着我们输入登入密码:
86duino
然后按下 ”OK” 按钮。
当你看到如下画面,代表已经成功登入 L86duntu 桌面了:
The text of the 86Duino reference is licensed under a Creative Commons Attribution-ShareAlike 3.0 License.