USB 摄影机的连接和使用
L86duntu 支援许多厂牌的 USB 摄影机,大部份 x86 平台 Linux 系统上可用的 USB 摄影机皆可在 L86duntu 上使用。以下说明 USB 摄影机的连接和设定方法。
准备
USB 摄影机:
86Duino 专用的 USB 扩充线:
步骤一
将安装好 L86duntu 的 SD 卡插入至 86Duino:
步骤二
将 USB 扩充线插上 86Duino:
步骤三
将 USB 摄影机经由 USB 扩充线连接至 86Duino:
步骤四
将 86Duino 接上电源,开机后登入 L86duntu 桌面,打开终端机,输入下面指令:
guvcview
接着您便可在 L86duntu 桌面上看到 USB 摄影机撷取的影像,如下图:
The text of the 86Duino reference is licensed under a Creative Commons Attribution-ShareAlike 3.0 License.