begin()
描述
連接到 GSM 網路。
語法
gsm.begin()
gsm.begin(pin)
gsm.begin(pin, restart)
gsm.begin(pin, restart, sync)
參數
pin
:儲存 PIN 碼的字元陣列,預設為 0
restart
:如果 restart
為 true
會重新啟動 Arduino GSM shield,接著再初始化,反之則不會重新啟動,直接初始化。restart
預設為 true
,型態為 boolean
sync
:如果 sync
為 true
則為同步(synchronous)模式,反之為非同步(asynchronous)模式,sync
預設為 true
,型態為 boolean
回傳
char:如果是非同步狀態回傳 0;如果是同步狀態,回傳連線的狀態:ERROR
, IDLE
, CONNECTING
, GSM_READY
, GPRS_READY
, TRANSPARENT_CONNECTED
範例
#include <GSM.h> #define PINNUMBER "" GSM gsm; void setup() { // 初始化 Serial Serial.begin(9600); // 連線狀態 boolean notConnected = true; // 啟動 Arduino GSM shield,如果你的 SIM 卡有 PIN 碼,請當作 begin() 的參數 while(notConnected) { if(gsm.begin(PINNUMBER)==GSM_READY) notConnected = false; else { Serial.println("Not connected"); delay(1000); } } Serial.println("GSM initialized"); } void loop() { // 不做任何事 }
See also
- GSM constructor
- shutdown()
The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.