begin()
描述
连接到 GSM 网路。
语法
gsm.begin()
gsm.begin(pin)
gsm.begin(pin, restart)
gsm.begin(pin, restart, sync)
参数
pin
:储存 PIN 码的字元阵列,预设为 0
restart
:如果 restart
为 true
会重新启动 Arduino GSM shield,接着再初始化,反之则不会重新启动,直接初始化。restart
预设为 true
,型态为 boolean
sync
:如果 sync
为 true
则为同步(synchronous)模式,反之为非同步(asynchronous)模式,sync
预设为 true
,型态为 boolean
回传
char:如果是非同步状态回传 0;如果是同步状态,回传连线的状态:ERROR
, IDLE
, CONNECTING
, GSM_READY
, GPRS_READY
, TRANSPARENT_CONNECTED
范例
#include <GSM.h> #define PINNUMBER "" GSM gsm; void setup() { // 初始化 Serial Serial.begin(9600); // 连线状态 boolean notConnected = true; // 启动 Arduino GSM shield,如果你的 SIM 卡有 PIN 码,请当作 begin() 的参数 while(notConnected) { if(gsm.begin(PINNUMBER)==GSM_READY) notConnected = false; else { Serial.println("Not connected"); delay(1000); } } Serial.println("GSM initialized"); } void loop() { // 不做任何事 }
See also
- GSM constructor
- shutdown()
The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.