println()
描述
透過序列埠印出具有閱讀性的 ASCII 文字,後面再接著回車字元 (ASCII 13 或 ‘\r’) 和新列字元 (ASCII 10 或 ‘\n’)。這個函式和 Serial.print()
有相同的格式。
語法
Serial.println(val)
Serial.println(val, format)
參數
val
: 要印的值 – 任意型別
format
: 指定印出的格式 (對於整數的資料型別) 或小數點後的位數 (對於符點數資料型別)
回傳
size_t (long):print()
的 byte 數
範例
/* 類比訊號輸入 從類比訊號腳 0 讀取類比訊號,然後印出讀到的值 created 24 March 2006 by Tom Igoe */ int analogValue = 0; // 儲存類比值的變數 void setup() { // 設定 Serial 為 9600 鮑率 Serial.begin(9600); } void loop() { // read the analog input on pin 0: analogValue = analogRead(0); // print it out in many formats: Serial.println(analogValue); // 印出十進位格式的數字 Serial.println(analogValue, DEC); // 印出十進位格式的數字 Serial.println(analogValue, HEX); // 印出十六進位格式的數字 Serial.println(analogValue, OCT); // 印出八進位格式的數字 Serial.println(analogValue, BIN); // 印出二進位格式的數字 // 延遲 10 毫秒後再讀取類比訊號 delay(10); }
See also
- Serial
- available()
- begin()
- end()
- find()
- findUntil()
- flush()
- parseFloat()
- parseInt()
- peek()
- print()
- read()
- readBytes()
- readBytesUntil()
- setTimeout()
- write()
- serialEvent()
The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.