SyncAxes 6 – 多軸控制器

6-Axis closed loop stepper motor controller


● 6 Axes stepper motor simultaneously
● Close loop operation
● Selectable microstepping and phase current
● Operating current up to 4.5A
● USB, SD card and LAN
● 12V – 30V voltage range
● 6 x Encoder interface
● 6 x Digital input
● 9 x High-speed DI up to 2MHz
● 9 x Digital output
● 3 x High-speed DO / PWM output

The SyncAxes 6 is an advance simultaneously stepper motor controller, integrated driver and control 2-phase stepper motor support currents up to 4.5 Amps/motor,also has six incremental encoder interfaces to meet the demand for multi-axis positioning.

Hardware specification


Storage SD card
LAN 10/100Mbps
USB USB 2.0 Host x 1
USB 2.0 Device x 1

Motor outputs

Number of outputs 6 x Stepper motor, 2 phases
Microstepping 1/1, 1/2, 1/4, 1/8, and 1/16 step
Voltage range 12V ~ 30V
Output current Max 4.5A

Encoder inputs

Channels 6 x Encoder counter
Each channel provides A, B, Index pins
Resolution 32 bits
Counting modes Pulse/Direction
Max. encoder pulse frequency 20MHz pps


Digital inputs 6 x Channels
Isolation voltage 2500 Vrms
Digital outputs 9 x Channels
Isolation voltage 2500 Vrms
High-speed digital inputs 9 x Channels
Isolation voltage 2500 Vrms
High-speed digital output v/
PWM output
3-Channel DO or 3x PWM outputs (up to 2MHz)
Isolation Voltage 5000 Vrms
RS-485 Max 500Kbps
Isolation voltage: 2500 Vrms


Input voltage 12V – 30V


Dimensions 245 x 111 x 51 mm (L*W*H)
Case material Metal

All features and specifications subject to change without notice.


  • 86Duino-SyncAxes_GM_Code_instruction

  • Arduino is a registered trademark of the Arduino Team

    86Duino preload program is free software: it under the terms of the GNU General Public License and GNU Lesser General Public License. See <>