SyncAxes 6 多軸控制器
6-Axis closed loop stepper motor controller
Features
● 6 Axes stepper motor simultaneously
● Close loop operation
● Selectable microstepping and phase current
● Operating current up to 4.5A
● USB, SD card and LAN
● 12V 30V voltage range
● 6 x Encoder interface
● 6 x Digital input
● 9 x High-speed DI up to 2MHz
● 9 x Digital output
● 3 x High-speed DO / PWM output
The SyncAxes 6 is an advance simultaneously stepper motor controller, integrated driver and control 2-phase stepper motor support currents up to 4.5 Amps/motor,also has six incremental encoder interfaces to meet the demand for multi-axis positioning.
Hardware specification
System
Storage | SD card |
LAN | 10/100Mbps |
USB | USB 2.0 Host x 1 USB 2.0 Device x 1 |
Motor outputs
Number of outputs | 6 x Stepper motor, 2 phases |
Microstepping | 1/1, 1/2, 1/4, 1/8, and 1/16 step |
Voltage range | 12V ~ 30V |
Output current | Max 4.5A |
Encoder inputs
Channels | 6 x Encoder counter Each channel provides A, B, Index pins |
Resolution | 32 bits |
Counting modes | Pulse/Direction CW/CCW Quadrature |
Max. encoder pulse frequency | 20MHz pps |
I/O
Digital inputs | 6 x Channels Isolation voltage 2500 Vrms |
Digital outputs | 9 x Channels Isolation voltage 2500 Vrms |
High-speed digital inputs | 9 x Channels Isolation voltage 2500 Vrms |
High-speed digital output v/ PWM output |
3-Channel DO or 3x PWM outputs (up to 2MHz) Isolation Voltage 5000 Vrms |
RS-485 | Max 500Kbps Isolation voltage: 2500 Vrms |
Power
Input voltage | 12V – 30V |
Mechanism
Dimensions | 245 x 111 x 51 mm (L*W*H) |
Case material | Metal |
All features and specifications subject to change without notice.
Arduino is a registered trademark of the Arduino Team
86Duino preload program is free software: it under the terms of the GNU General Public License and GNU Lesser General Public License. See <http://www.gnu.org/licenses/>