prepare()
描述
預備從檔案讀取至緩衝區的音頻樣本並且設置音量。
語法
Audio.prepare(buffer, samples, volume);
Parameters
buffer
(short):儲存音頻樣本的緩衝區。
samples
(int):緩衝區中儲存的音頻樣本數量。
volume
(int):一個 10 位元的數字,代表音頻的音量。0 表示沒有聲音,1023 是最大聲。
回傳
無回傳值
範例
#include <SD.h> #include <Audio.h> void setup() { // 輸出鮑率設定 Serial.begin(9600); // 設定 SD 卡 Serial.print("Initializing SD card..."); if (!SD.begin()) { Serial.println(" failed!"); return; } Serial.println(" done."); // 44100hz 立體聲 => 88200 取樣率 // 100 毫秒的緩衝時間 Audio.begin(88200, 100); } void loop() { int count=0; // 從 SD 卡開啟音頻檔案 File myFile = SD.open("test.wav"); if (!myFile) { // 如果開啟檔案失敗,印出錯誤訊息並中止 Serial.println("error opening test.wav"); while (true); } const int S=1024; // 每個區塊的取樣個數 short buffer[S]; Serial.print("Playing"); // 直到檔案結束 while (myFile.available()) { // 從檔案讀取資料至 buffer myFile.read(buffer, sizeof(buffer)); // 預備樣本 int volume = 1023; Audio.prepare(buffer, S, volume); // 輸出緩衝區中的音頻樣本 Audio.write(buffer, S); // 每一百個區塊印出一個 '.' count++; if (count == 100) { Serial.print("."); count = 0; } } myFile.close(); Serial.println("End of file. Thank you for listening!"); while (true) ; }
The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.