Mouse.release()
Description
Sends a message that a previously pressed button (invoked through Mouse.press()) is released. Mouse.release()
defaults to the left button.
WARNING: When you use the Mouse.release()
command, the 86Duino takes over your mouse! Make sure you have control before you use the command. A pushbutton to toggle the mouse control state is effective.
Syntax
Mouse.release();
Mouse.release(button);
Parameters
button
: which mouse button to release – char
-MOUSE_LEFT
(default)
-MOUSE_RIGHT
-MOUSE_MIDDLE
Returns
nothing
Example
void setup(){ //The switch that will initiate the Mouse press pinMode(2,INPUT); //The switch that will terminate the Mouse press pinMode(3,INPUT); //initiate the Mouse library Mouse.begin(); } void loop(){ //if the switch attached to pin 2 is closed, press and hold the right mouse button if(digitalRead(2) == HIGH){ Mouse.press(); } //if the switch attached to pin 3 is closed, release the right mouse button if(digitalRead(3) == HIGH){ Mouse.release(); } }
See also
- Mouse.begin()
- Mouse.click()
- Mouse.end()
- Mouse.move()
- Mouse.press()
- Mouse.isPressed()
The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.