Forum

Please consider registering
guest

Log In Register

Register | Lost password?
Advanced Search

— Forum Scope —

  

— Match —

   

— Forum Options —

   

Minimum search word length is 4 characters - maximum search word length is 84 characters

Topic RSS
Can not load sketch to educake
2016 年 04 月 09 日
07:07:15
super8
New Member
Forum Posts: 3
Member Since:
2016 年 04 月 09 日
Offline

Hi,

I've been trying to load a sketch to the educake on 3 different machines and all have failed with the error below. I do not think it is power related because two of the three computers have USB 3.0 ports, so there's no way the educake would have power issue. All 3 PCs I run Linux Ubuntu 14.04 LTS 32bit. Please let me know if you need me to try anything else to get it to work. thanks

On a side note, I also have an Arduino UNO, I never have a problem loading sketches to it. Its just the Educake giving me problem.

Arduino: Coding 212 (Linux), Board: "86Duino EduCake"

/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-gcc -c -w -g -MMD -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -O1 -DARDUINO=158 -D_86DUINO=212 /tmp/build3074636868267717402.tmp/sketch_apr08a.cpp -o /tmp/build3074636868267717402.tmp/sketch_apr08a.cpp.o -I/usr/local/src/x86Duino/86Duino_Coding_212/hardware/86duino/x86/cores/arduino -I/usr/local/src/x86Duino/86Duino_Coding_212/hardware/86duino/x86/variants/educake -I/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/lib/ -I/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/i586-pc-msdosdjgpp/sys-include/
EduCake
Using previously compiled file: /tmp/build3074636868267717402.tmp/dtostrf.c.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/itoa.c.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/wiring_analog.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/WMath.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/wiring_digital.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/uart.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/HardwareSerial.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/Stream.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/Print.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/irq.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/wiring.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/i2c.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/wdt.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/WInterrupts.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/tone.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/wiring_pulse.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/wiring_shift.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/eeprom.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/HID.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/vortex86.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/com.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/mcm.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/main.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/USBDesc.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/io.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/USBCore.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/queue.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/IPAddress.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/err.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/i2cex.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/WString.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/can.cpp.o
Using previously compiled file: /tmp/build3074636868267717402.tmp/CDC.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/dtostrf.c.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/itoa.c.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/wiring_analog.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/WMath.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/wiring_digital.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/uart.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/HardwareSerial.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/Stream.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/Print.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/irq.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/wiring.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/i2c.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/wdt.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/WInterrupts.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/tone.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/wiring_pulse.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/wiring_shift.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/eeprom.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/HID.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/vortex86.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/com.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/mcm.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/main.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/USBDesc.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/io.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/USBCore.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/queue.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/IPAddress.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/err.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/i2cex.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/WString.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/can.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-ar rcs /tmp/build3074636868267717402.tmp/libcore.a /tmp/build3074636868267717402.tmp/CDC.cpp.o
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-gcc -w -Wl,--gc-sections -O1 -o /tmp/build3074636868267717402.tmp/86duino.exe /tmp/build3074636868267717402.tmp/sketch_apr08a.cpp.o -L/tmp/build3074636868267717402.tmp -L/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/lib/ -lcore -lstdc++
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/djgpp/bin/i586-pc-msdosdjgpp-strip -v /tmp/build3074636868267717402.tmp/86duino.exe
copy from `/tmp/build3074636868267717402.tmp/86duino.exe' [coff-go32-exe] to `/tmp/build3074636868267717402.tmp/stmOl4XB' [coff-go32-exe]
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/upx309w/upx.exe /tmp/build3074636868267717402.tmp/86duino.exe
Ultimate Packer for eXecutables
Copyright (C) 1996 - 2013
UPX 3.91 Markus Oberhumer, Laszlo Molnar & John Reiser Sep 30th 2013

File size Ratio Format Name
-------------------- ------ ----------- -----------
343040 -> 128432 37.44% djgpp2/coff 86duino.exe

Packed 1 file.

Sketch uses 154,888 bytes (7%) of program storage space. Maximum is 2,048,000 bytes.
Forcing reset using 1200bps open/close on port /dev/ttyACM8
PORTS {/dev/ttyACM8, } / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
processing.app.debug.RunnerException: Couldn't find a Board on the selected port. Check that you have the correct port selected. If it is correct, try pressing the board's reset button after initiating the upload.
at cc.arduino.packages.uploaders.SerialUploader.waitForUploadPort(SerialUploader.java:214)
at cc.arduino.packages.uploaders.SerialUploader.uploadUsingPreferences(SerialUploader.java:104)
at processing.app.Sketch.upload(Sketch.java:1718)
at processing.app.Sketch.exportApplet(Sketch.java:1629)
at processing.app.Sketch.exportApplet(Sketch.java:1601)
at processing.app.Editor$DefaultExportHandler.run(Editor.java:2423)
at java.lang.Thread.run(Thread.java:745)
Couldn't find a Board on the selected port. Check that you have the correct port selected. If it is correct, try pressing the board's reset button after initiating the upload.

2016 年 04 月 12 日
12:02:30
Android_Lin
Moderator
Forum Posts: 211
Member Since:
2014 年 04 月 01 日
Offline

Hi, super8,

From the showing messages on 86Duino IDE, the EduCake USB COM port on your PC is /dev/ttyACM8, and 86Duino IDE does not find it again after reseting EduCake, you can try to check following:

1. The /dev/ttyACM8 always appears on 86Duino IDE Port list when the power switch is from OFF to ON?
2. Do you have refer to the tutorial to install the runtime environment of 86Duino Coding?

2016 年 04 月 21 日
10:42:13
super8
New Member
Forum Posts: 3
Member Since:
2016 年 04 月 09 日
Offline

Android_lin,

I did have the udev rule to make sure the ACM device name always be the same, and it still did not work. Here is the kernel message:

[ 739.700877] input: DMP Electronics INC. Vortex86EX USB Device as /devices/pci0000:00/0000:00:1c.4/0000:02:00.0/usb1/1-2/1-2:1.2/0003:0525:8036.0005/input/input15
[ 739.755584] hid-generic 0003:0525:8036.0005: input,hidraw4: USB HID v1.01 Mouse [DMP Electronics INC. Vortex86EX USB Device] on usb-0000:02:00.0-2/input2
[ 739.787438] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 739.788864] usbcore: registered new interface driver cdc_acm
[ 739.788867] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 764.473830] usb 1-2: USB disconnect, device number 4
[ 768.010836] usb 1-2: new full-speed USB device number 5 using xhci_hcd
[ 768.185174] usb 1-2: New USB device found, idVendor=0525, idProduct=8036
[ 768.185179] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 768.185182] usb 1-2: Product: Vortex86EX USB Device
[ 768.185184] usb 1-2: Manufacturer: DMP Electronics INC.
[ 768.185186] usb 1-2: SerialNumber: 1.0.0
[ 768.185368] usb 1-2: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 768.201237] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 768.237294] input: DMP Electronics INC. Vortex86EX USB Device as /devices/pci0000:00/0000:00:1c.4/0000:02:00.0/usb1/1-2/1-2:1.2/0003:0525:8036.0006/input/input16
[ 768.290838] hid-generic 0003:0525:8036.0006: input,hidraw4: USB HID v1.01 Mouse [DMP Electronics INC. Vortex86EX USB Device] on usb-0000:02:00.0-2/input2
[ 880.512434] usb 1-2: USB disconnect, device number 5
[ 880.515244] cdc_acm 1-2:1.0: failed to set dtr/rts
[ 882.466052] usb 1-2: new full-speed USB device number 6 using xhci_hcd
[ 882.636611] usb 1-2: New USB device found, idVendor=0525, idProduct=a4a5
[ 882.636617] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 882.636620] usb 1-2: Product: Vortex86EX USB Device
[ 882.636623] usb 1-2: Manufacturer: DMP Electronics INC.
[ 882.636626] usb 1-2: SerialNumber: 1.0.0
[ 882.636791] usb 1-2: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 882.651652] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 882.651725] usb-storage 1-2:1.0: Quirks match for vid 0525 pid a4a5: 10000
[ 882.651752] usb-storage: probe of 1-2:1.0 failed with error -5
[ 882.651803] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 902.914348] usb 1-2: USB disconnect, device number 6
[ 902.914422] cdc_acm 1-2:1.0: failed to set dtr/rts

here is the log from 86Duino Code:

Sketch uses 154,900 bytes (7%) of program storage space. Maximum is 2,048,000 bytes.
Forcing reset using 1200bps open/close on port /dev/ttyACM0
PORTS {/dev/ttyACM0, /dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } / {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } => {}
PORTS {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } / {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } => {}
PORTS {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } / {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } => {}
PORTS {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } / {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } => {}
PORTS {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } / {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } => {}
PORTS {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } / {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } => {}
PORTS {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } / {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } => {}
PORTS {/dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } / {/dev/ttyACM0, /dev/ttyS0, /dev/ttyS1, /dev/ttyS4, /dev/ttyUSB0, } => {/dev/ttyACM0, }
Found upload port: /dev/ttyACM0
/usr/local/src/x86Duino/86Duino_Coding_212/hardware/tools/x86/v86dude.exe /dev/ttyACM0 20 /tmp/build9113379559879665713.tmp/86duino.exe
Bootloader version: Hehuan 1.0
...time-out to read bytes
BIOS version: Hehuan 1.0

Uploading the binary sketch ...time-out to read bytes
...time-out to read bytes

2016 年 04 月 25 日
18:18:02
Android_Lin
Moderator
Forum Posts: 211
Member Since:
2014 年 04 月 01 日
Offline

Hi, super8:

There is no bootloader version in the showing massage, it seems that the file recorded bootloader version may is broken in SPI flash, recommend to restore the 86Duino firmware using SysImage and select "Updating 86Duino firmware" option in the SysImage menu.

Android_Lin

2016 年 05 月 27 日
03:53:21
super8
New Member
Forum Posts: 3
Member Since:
2016 年 04 月 09 日
Offline

I found the root cause, it was that the ModemManager was talking to the x86duino right after the USB reset event, just as the ttyACM detected on the bus. To fix it, add an udev rule (see below) under /lib/udev/rules.d/77-mm-usb-devices

# 86Duino
ATTRS{idVendor}=="0525", ATTRS{idProduct}=="a4a5", ENV{ID_MM_DEVICE_IGNORE}="1"

# 86Duino
ATTRS{idVendor}=="0525", ATTRS{idProduct}=="a4a5", ENV{ID_MM_DEVICE_IGNORE}="1"
ATTRS{idVendor}=="0525", ATTRS{idProduct}=="8036", ENV{ID_MM_DEVICE_IGNORE}="1"

2016 年 05 月 31 日
10:19:10
Android_Lin
Moderator
Forum Posts: 211
Member Since:
2014 年 04 月 01 日
Offline

Hi, Super8

Thank your reply, the Step 3 of tutorial has described this fix in past, but the following picture did not be updated, and it may be confused. Now the picture is updated, and shows this fix clearly.

Android_Lin

Forum Timezone: Asia/Taipei

Most Users Ever Online: 66

Currently Online:
3 Guest(s)

Currently Browsing this Page:
1 Guest(s)

Top Posters:

Dinosaur: 27

leutenecker: 13

mrZagg: 10

lukeross: 8

tomka: 8

smeezekitty: 8

hippy: 8

Ekkehard: 8

UIdahoCIT: 8

blaxxun: 7

Member Stats:

Guest Posters: 0

Members: 1541

Moderators: 14

Admins: 5

Forum Stats:

Groups: 2

Forums: 10

Topics: 239

Posts: 1082

Newest Members: nhollywoodmarli, bat869cube672, lenggeleranto, iknowesp, dimka, elihu, Woodrowcercraby, Robertnalty, Homerwoppy, RonaldLew

Moderators: Glaux: 70, uaa: 11, guigra: 17, asian55: 22, Android_Lin: 211, bcarroll: 12, cucubutter: 84, recycled-air: 12, stevemork: 16, zerozaber: 52, pongraczi: 20, George Andrews III: 56, poto: 11, garpastym: 20

Administrators: eveshih: 1, anthony: 31, viky6: 0, roboard: 135, hcl: 0