Articles Posted in the " " Category
-
setVelocity()
Sorry, this entry is only available in 简体中文 and 繁體中文.
-
angleMap()
Sorry, this entry is only available in 简体中文 and 繁體中文.
-
write()
Sorry, this entry is only available in 简体中文 and 繁體中文.
-
attached()
Sorry, this entry is only available in 简体中文 and 繁體中文.
-
detach()
Sorry, this entry is only available in 简体中文 and 繁體中文.
-
attach()
Sorry, this entry is only available in 简体中文 and 繁體中文.
-
Servo86 Library
This library is available from 86Duino Coding 209 to make easy the motion control of the robots consisting of RC (hobby) servo motors. It is fully compatible to the original Servo library of Arduino/86Duino, and adds new advanced functions to control the velocity and action sequences of each servo. DEMO VIDEO Libraries Reference Home The […]
-
ROSserial86 Library
Introduction ROSserial86 is a library that is supported by the 86Duino Coding 208 IDE and is a rosserial designed for the 86Duino port to support communication between the 86Duino and the Robot Operating System (ROS). The following is an official introduction to rosserial: ROSserial86 combines the functions of rosserial_arduino and rosserial_embeddedlinux so that the 86Duino […]
-
86Duino Zero Hardware Introduction
Introduction 86Duino Zero is a development board with a micro controller based on the x86 architecture. It includes a 32 bit x86 CPU Vortex86EX and is also compatible with Arduino sketches. The Zero is an entry level board in the 86Duino series and provides the same output interface as the Arduino UNO and Leonardo. The […]
-
86Duino One Hardware Introduction
Introduction 86Duino-One is an open-source microcomputer learning platform built on Vortex86EX, a System-On-Chip (SoC) built with 32-bit x86 processor. It’s designed to be electronically compatible to the Arduino platform. In addition, all 86Duino platform includes Arduino emulation software which enables application codes written for Arduino (sketch) to be compiled and run on the 86Duino platform […]
