Description Stops writing data to a server Syntax client.endWrite() Parameters none Returns none See also － GSMClient － ready() － connect() － beginWrite() － write() － connected() － read() － available() － peek() － flush() － stop() Libraries Reference Home The text of the 86Duino reference is a modification of the Arduino reference, and is […]

Description Write data to the server the client is connected to. Syntax client.write(data) client.write(buffer) client.write(buffer, size) Parameters data: the value to write (byte or char) buffer: an array of data (byte or char) to write size: size of the buffer to write (byte) Returns byte – write() returns the number of bytes written. It is […]

Description Tells the client to start writing to the server it is connected to. Syntax client.beginWrite() Parameters none Returns none See also － GSMClient － ready() － connect() － write() － endWrite() － connected() － read() － available() － peek() － flush() － stop() Libraries Reference Home The text of the 86Duino reference is a […]

Description Connects to a specified IP address and port. The return value indicates success or failure. Syntax client.connect(ip, port) Parameters ip: the IP address that the client will connect to (array of 4 bytes) port: the port that the client will connect to (int) Returns boolean : Returns true if the connection succeeds, false if […]

Description Gets the status of the last command Syntax client.ready() Parameters none Returns In asynchronous mode, ready() returns 0 if the last command is still executing, 1 if it was successful, and >1 if there is an error. In synchronous mode, it returns 1 if the previous successfully executed, and 0 if it has not. […]

Description Client is the base class for all GPRS client based calls. It is not called directly, but invoked whenever you use a function that relies on it. See also － ready() － connect() － beginWrite() － write() － endWrite() － connected() － read() － available() － peek() － flush() － stop() Libraries Reference Home […]

Description GPRS is the base class for all GPRS functions, such as internet client and server behaviors. See also － attachGPRS() Libraries Reference Home The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into […]

Description Connects to the specified Access Point Name (APN) to initiate GPRS communication. Every cellular provider has an Access Point Name (APN) that serves as a bridge between the cellular network and the internet. Sometimes, there is a username and password associated with the connection point. For example, the Bluevia APN is bluevia.movistar.es, but it […]

Description GSM_SMS is the base class for all GSM functions relating to receiving and sending SMS messages. See also － beginSMS() － ready() － endSMS() － available() － remoteNumber() － read() － write() － print() － peek() － flush() Libraries Reference Home The text of the 86Duino reference is a modification of the Arduino reference, […]

Description Identifies the telephone number to send an SMS message to. Syntax SMS.beginSMS(number) Parameters number : char array, the phone number to send the SMS to Returns int In asynchronous mode, beginSMS() returns 0 if the last command is still executing, 1 if success, and >1 if there is an error. In synchronous mode, it […]