Description Initializes the WiFi UDP library and network settings. Starts WiFiUDP socket, listening at local port Syntax WiFiUDP.begin(port); Parameters port: the local port to listen on (int) Returns － 1: if successful － 0: if there are no sockets available to use Libraries Reference Home The text of the 86Duino reference is a modification of […]

Description Creates a named instance of the WiFi UDP class that can send and receive UDP messages Syntax WiFiUDP Parameters none Libraries Reference Home The text of the 86Duino reference is a modification of the 86Duino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into […]

Description Disconnect from the server. Syntax client.stop() Parameters none Returns none Libraries Reference Home The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.

Description Discard any bytes that have been written to the client but not yet read. flush() inherits from the Stream utility class. Syntax client.flush() Parameters none Returns none Libraries Reference Home The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code […]

Description Read the next byte received from the server the client is connected to (after the last call to read()). read() inherits from the Stream utility class. Syntax client.read() Parameters none Returns The next byte (or character), or -1 if none is available. See also － Stream.read() Libraries Reference Home The text of the 86Duino […]

Description Returns the number of bytes available for reading (that is, the amount of data that has been written to the client by the server it is connected to). available() inherits from the Stream utility class. Syntax client.available() Parameters none Returns The number of bytes available. Example Libraries Reference Home The text of the 86Duino […]

Description Print data, followed by a carriage return and newline, to the server a client is connected to. Prints numbers as a sequence of digits, each an ASCII character (e.g. the number 123 is sent as the three characters ‘1’, ‘2’, ‘3’). Syntax client.println() client.println(data) client.println(data, BASE) Parameters data: the data to print (char, byte, […]

Description Print data to the server that a client is connected to. Prints numbers as a sequence of digits, each an ASCII character (e.g. the number 123 is sent as the three characters ‘1’, ‘2’, ‘3’). Syntax client.print(data) client.print(data, BASE) Parameters data: the data to print (char, byte, int, long, or string) BASE (optional): the […]

Description Write data to the server the client is connected to. Syntax client.write(data) Parameters data: the byte or char to write Returns byte: the number of characters written. it is not necessary to read this value. Libraries Reference Home The text of the 86Duino reference is a modification of the Arduino reference, and is licensed […]

Description Connect to the IP address and port specified. The return value indicates success or failure. connect() also supports DNS lookups when using a domain name (ex: “google.com”). Syntax client.connect(ip, port) client.connect(URL, port) Parameters ip: the IP address that the client will connect to (array of 4 bytes) URL: the domain name the client will […]