Description Sets the order of the bits shifted out of and into the SPI bus, either LSBFIRST (least-significant bit first) or MSBFIRST (most-significant bit first). Syntax SPI.setBitOrder(order) Parameters order: either LSBFIRST or MSBFIRST Returns None See also － setClockDivider() － setDataMode() Libraries Reference Home The text of the 86Duino reference is a modification of the […]

Description Disables the SPI bus. Syntax SPI.end() Parameters None Returns None See also － begin() Libraries Reference Home The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.

Description Initializes the SPI bus. Syntax SPI.begin() Parameters None Returns None See also － SPI.end() － SPI.setClockDivider() － SPI.setDataMode() － SPI.setBitOrder() Libraries Reference Home The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into […]

This application note talks about system configuration to address problems associate with not able to locate the serial port and modem manager.(See the older version here before Coding 207) Step 1 Launch the terminal program. Step 2 In this section, we will talk about the steps to change Modem Manager’s settings, to prevent the Modem […]

86Duino development environment, 86Duino Coding, requires Java JRE. This application note talks about the steps to install the Java JRE packages to a CentOS machine. In addition, we also talk about system configuration to address problems associate with not able to locate the serial port and modem manager.(See the older version here before Coding 207) […]

86Duino development environment, 86Duino Coding, requires Java JRE . This application note talks about the steps to install Java JRE packages. In addition, we also talk about system configuration to address problems associate with not able to locate the serial port and modem manager. (See the older version here before Coding 207) Step 1 Launch […]

Description Must be called to initialize the Arduino GLCD screen before drawing anything. Syntax screen.begin() Parameters none Returns none Example See also － TFT Libraries Reference Home The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference […]

Description This is the named instance of the TFT class when targeting the Arduino Esplora board. Syntax EsploraTFT Parameters none Returns none Example See also － TFT － begin() Libraries Reference Home The text of the 86Duino reference is a modification of the 86Duino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. […]

Description The base class for drawing to the Arduino TFT screen. Use this to create an named instance of the TFT class to refer to in your sketch. Syntax TFT(cs, dc, rst); // for using hardware SPI TFT(cs, dc, mosi, sclk, rst); // for use on any pins Parameters cs: pin for chip select (int) […]

Description Turns the motor a specific number of steps, at a speed determined by the most recent call to setSpeed(). This function is blocking; that is, it will wait until the motor has finished moving to pass control to the next line in your sketch. For example, if you set the speed to, say, 1 […]