attach()

Description

Attach the Servo variable to a pin.

Syntax


servo.attach(pin)
servo.attach(pin, min, max)


Parameters

servo: a variable of type Servo

pin: the number of the pin that the servo is attached to

min (optional): the pulse width, in microseconds, corresponding to the minimum (0-degree) angle on the servo (defaults to 544)

max (optional): the pulse width, in microseconds, corresponding to the maximum (180-degree) angle on the servo (defaults to 2400)

Example

#include <Servo.h> 

Servo myservo;

void setup() 
{ 
  myservo.attach(9);
} 

void loop() {} 

See also

－ attached()
－ detach()

Libraries Reference Home

The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.