Mouse.release()

Description

Sends a message that a previously pressed button (invoked through Mouse.press()) is released. Mouse.release() defaults to the left button.

WARNING: When you use the Mouse.release() command, the 86Duino takes over your mouse! Make sure you have control before you use the command. A pushbutton to toggle the mouse control state is effective.

Syntax


Mouse.release();
Mouse.release(button);


Parameters

button: which mouse button to release – char
－MOUSE_LEFT (default)
－MOUSE_RIGHT
－MOUSE_MIDDLE

Returns

nothing

Example

void setup(){
  //The switch that will initiate the Mouse press
  pinMode(2,INPUT);
  //The switch that will terminate the Mouse press
  pinMode(3,INPUT);
  //initiate the Mouse library
  Mouse.begin();
}

void loop(){
  //if the switch attached to pin 2 is closed, press and hold the right mouse button
  if(digitalRead(2) == HIGH){
    Mouse.press();
  }
  //if the switch attached to pin 3 is closed, release the right mouse button
  if(digitalRead(3) == HIGH){
    Mouse.release();
  }
}

See also

－ Mouse.begin()
－ Mouse.click()
－ Mouse.end()
－ Mouse.move()
－ Mouse.press()
－ Mouse.isPressed()

Reference Home

The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.