setJogSpeed()

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

#include "Motion86.h"

// Generate machine objects. You can use up to three machines, machine 0~2, each with three axes.

Machine machine(0);

// Stepper Motor enable pin。

int EnablePin = 4;

void setup() {

  while (!Serial);

  pinMode(EnablePin, OUTPUT);

  // If necessary, the direction of motion of the axis can be reversed.

  // In this example, you need to reverse the direction of the x-axis and the y-axis.

  machine.config_ReverseDirection(AXIS_X);

  machine.config_ReverseDirection(AXIS_Y);

  // PPU (pulse per unit) is a virtual unit of length, depending on different needs.

  // In this example, the unit length of the x-axis is set to 80 pulses, which corresponds to 1 mm in actual application.

  machine.config_PPU(AXIS_X, 80.0);

  machine.config_PPU(AXIS_Y, 80.0);

  machine.config_PPU(AXIS_Z, 1600.0);

  // Before controlling, the machine must be started.

  machine.machineOn();

  // Set the Machine to jog mode and trigger it with the button it is connected to.

  machine.beginJog(27, 28, 32, 3, 16, 17, false);

  // If the Machine is set to Inc Jog mode, the offset should be configured to set how many millimeters each click moves.

  // machine.beginJog(27, 28, 32, 3, 16, 17, true);

  // machine.setJogOffset(1.0);

  // Feedrate in Jog mode.

  machine.setJogSpeed(600);

  // Start the stepper motor.

  digitalWrite(EnablePin, LOW);

}

void loop() {

  Serial.print("Jog position = ");

  Serial.print(machine.getJogPos(AXIS_X));

  Serial.print(", ");

  Serial.print(machine.getJogPos(AXIS_Y));

  Serial.print(", ");

  Serial.println(machine.getJogPos(AXIS_Z));

  delay(500);

}