attach()
Description
Attach the Servo variable to a pin.
Syntax
servo.attach(pin)
servo.attach(pin, min, max)
Parameters
servo
: a variable of type Servo
pin
: the number of the pin that the servo is attached to
min
(optional): the pulse width, in microseconds, corresponding to the minimum (0-degree) angle on the servo (defaults to 544)
max
(optional): the pulse width, in microseconds, corresponding to the maximum (180-degree) angle on the servo (defaults to 2400)
Example
#include <Servo.h> Servo myservo; void setup() { myservo.attach(9); } void loop() {}
See also
- attached()
- detach()
The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.