Keyboard.begin()

Description

Keyboard.begin() starts emulating a keyboard connected to a computer. To end control, use Keyboard.end().

Syntax


Keyboard.begin()


Parameters

none

Returns

nothing

Example

void setup() {
  // make pin 2 an input and turn on the 
  // pullup resistor so it goes high unless
  // connected to ground:
  pinMode(2, INPUT_PULLUP);
  Keyboard.begin();
}

void loop() {
  //if the button is pressed
  if(digitalRead(2)==LOW){
    //Send the message
    Keyboard.print("Hello!");
  }
}

See also

－ Keyboard.end()
－ Keyboard.press()
－ Keyboard.print()
－ Keyboard.println()
－ Keyboard.release()
－ Keyboard.releaseAll()
－ Keyboard.write()

Reference Home

The text of the 86Duino reference is a modification of the Arduino reference, and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.