CanFestival86 is the x86 porting version of CanFestival, which can run on the 86Duino One board with built-in CAN Port. CanFestival is an open source CANopen Stack, which covers the core communication system of the CANopen CiA DS-301 standard, and also includes important implementations such as CiA DS-302 Configuration Manager and CiA DS-305 LSS.It supports […]

Next to the USB-HOST connector on the 86Duino Zero, you can find the text starting with “DM222,” as shown in the figure below: If it is marked with “DM222A”, the 86Duino Zero is an old version; if it is marked with “DM222B”, the 86Duino Zero is a new version. 86Duino Zero hardware description page The […]

DEMO VIDEOs Libraries Reference Home The text of the 86Duino reference is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.

Project Origin Function description Prepare materials Printing mechanism Assembly parts Motion control Results display Related information   Origin of the project "Well… After the Scarna project, I really want to make a cute six-legged robot…" Perhaps it was because the previous Sgarna project successfully attracted widespread attention and discussion, which triggered the Maker soul in […]

If the main control board you are using is 86Duino Zero, in order to quickly and neatly connect multiple servos to 86Duino Zero, it is strongly recommended to manually make an electronic expansion board. It consists of 3 3×4 DuPont pins and 1 1×2 DuPont pin. Each 3×4 pin can be plugged into 4 servos, […]

If the main control board you are using is 86Duino Zero, in order to quickly and neatly connect multiple servos to 86Duino Zero, it is strongly recommended to manually make an electronic expansion board. It consists of 3 3×4 DuPont pins and 1 1×2 DuPont pin. Each 3×4 pin can be plugged into 4 servos, […]

Origin of the project This project originated one day when Soldier B came to the company with a magic cube and was bumped into by the boss."So you can turn magic cubes! Then making a magic cube robot should be a piece of cake for you!" The boss said, and Soldier B was assigned the […]

86Diuno IDE has added this library since Coding 318 to support the Modbus communication protocol, which is an industrial communication standard published in 1979 for communication between automated electronic devices such as Programmable Logic Controllers (PLCs). Modbus is a protocol based on the master/slave architecture. There is a master node communicating with multiple slave nodes on […]

Project Origin Functional Description Prepare Materials Printing Agency Assembly parts Motion control Results display Related information   Project origin This project originated from the Robot-Skarner project. "It seems that a six-legged robot is easier to make!" The boss was thinking. "Dr. Enzhuo, let's bribe U-Da! Ask him to make a small hexapod robot using 3D […]